Ingredient
Powder, soluble in water
Active ingredient: Peroxygen (Potassium monopersulphate tripie sait)....49.8 %
Organic acid (Malid acid)……… ………….....…………….………......9.3 % Inorganic buffer system (Sodium hexametaphosphate, Sodium chloride, Sulphamic acid)...........27.6 %
Surfactant (Sodium dodecyl benzene sulphonate)……………….…….13.3 %
Point
Eco Virfam S is used to disinfect surfaces of barns and equipment, vehicles, water supply systems, drinking water and air in the presence of livestock, helping to reduce pathogens in the environment and reduce the possibility of cross-contamination.
Dosage
Periodically disinfect the surface of barns, tools, vehicles:
Mix 100 g per 10 liters of water. Spray evenly on all surfaces (300 ml per m2) with low pressure.
• Disinfect the water supply system: Mix 100 g per 10 liters of water.
Scrub clean, drain the water after the rearing period, fill the water supply system with the mixed solution and drain after 4 hours.
• Disinfect drinking water: Mix 100 g per 100 liters of water. Stir well and let livestock and poultry drink.
• Spray with a cold fog machine (secondary disinfection): Mix 100 g per 10 liters of water (1:100), spray 1 liter of the mixed solution for 40 m2 of surface.
• Shoe and boot dip pits, wheels: Mix 100 g per 10 liters of water, replace the solution every 4-5 days or when too dirty.
Need to scrub and clean the cage, livestock equipment, vehicle, boots, front wheels to increase disinfection efficiency.
Preservation
Store in a cool, dry place, away from sunlight.
Only use when packaging is intact